How to Deep Clean Carpet Yourself – Two Effective Methods

Carpets can enhance the beauty of your living room but you might not know how to deep clean carpet yourself when it gets dirty. Most people usually think that vacuuming your carpet regularly is enough to keep it clean. What they don’t know is that vacuum cleaning your carpet only helps to remove the dust, dirt or pollen and not the stains or smell. If you have pets and kids in your house it can result in unwanted spills or stains, which can wreak havoc on your carpet. If this happens, deep cleaning your carpet can help eliminate the stains and preserve its condition for years. If you want a fresh smelling and clean carpet, you first need to vacuum clean then spot treat your carpet. Here is an in-depth look at how you can deep clean your carpet yourself without machines.

How to Deep Clean Carpet Yourself

Method 1: Deep Clean Your Carpet without a Steam CleanerHow to Deep Clean Carpet Yourself

In this method, you will need to use either a dish soap or baking soda as cleaners. Tools you will need include an old toothbrush, towel, brush, and bucket. Once the room is ready, assemble the cleaning tool and a bucket of warm water. The next step is to vacuum clean the carpet to remove as much dirt and dust out as possible before you begin deep cleaning your carpet. Make sure you vacuum clean the entire floor, especially areas that had been covered by furniture.

If you are using baking soda as your cleaner, sprinkle it over the carpet stain until it is completely covered. In case you are using dish soap, apply 1 tablespoon of dish soap per every 6 to 8 inches of carpet stain. Rub it around until bubbles start to form. Take a towel, old toothbrush or brush and gently scrub the carpet stain with warm water. Afterward, allow the carpet to air dry by opening the doors and windows. Once the carpet is dry, vacuum it again.

Method 2: Deep Cleaning Your Carpet Without Using a Machine

You don’t have to hire or buy a machine to deep clean your carpet, especially if you don’t have the money or time to rush to a nearby shop to get a steam cleaner. Luckily, with a vacuum and tools such as scrubbing brush and water bottle, you can deep clean your carpet without the need of using a machine. Other things you will need include an old rag, baking soda, and table salt. Begin by preparing a mixture of detergent (1/8 tablespoon of soap) and water in a spray bottle.

  • Sprinkle table salt and baking soda over the spot you want to clean without covering it fully. Use the spray bottle, spray soapy water over the area and let it sit for a couple of minutes. Gently brush the carpet in one direction using a scrubbing brush.
  • Next, press an old towel into your carpet to absorb the water. Once the carpet is almost dry, empty the spray bottle and fill it with clean tap water. Spray the carpet lightly then press towel into the carpet to dry it once more.

In Conclusion

There are many other DIY options you can find online which can help you deep clean your carpet. However, these two methods can help you know how to deep clean carpet yourself in case regular vacuuming doesn’t work.

Leave a Reply

Your email address will not be published. Required fields are marked *